During this phase of the Tulip Poplar Bathroom renovations, we installed Kerdi waterproof membrane on the shower walls and floor, sloped the shower floor, installed and painted beadboard, and laid tile. Whoa! A lot goes into building a bathroom, and we’re getting close to completing this one.
We painted the walls of the bathroom a creamy yellow, and we painted the beadboard white. Josh installed a shelf above the beadboard – it will be perfect for holding toiletries or a small bud vase. A big thank you to our friends who helped us paint!
Josh spent a lot of time carefully installing Kerdi membrane – this material covers the shower walls and floor to waterproof it. It uses the “fleece” of either side of the membrane to adhere to the drywall, or backer board, with the help of unmodified thin-set mortar. Advanced putty knife techniques are helpful, but it doesn’t take long to get the hang of it. He also finished a shelf that’s built into the shower wall, and he carefully covered it with Kerdi membrane, too.
Next, Josh sloped the shower floor with “deck mud,” which is about a 1:6 mix of cement and sand. This base will ensure that the water will properly flow into the drain. He calculated, measured, and pounded the mortar into shape with a wood float.
For the floor, we chose a cream colored marble tile and for the shower walls, we selected large white ceramic tiles. The ceramic wall tiles are a neat shape – not your typical rectangular subway tile – these have a more obtuse shape.
Lastly for this phase of the project, Josh installed the cabinet, toilet, and sink. He connected these to the newly installed plumbing. These additions really bring the bathroom close to completion. We’re almost there and are really excited to share the finished product with you!